riedon inc. 300 cypress avenue alhambra ca 91801 (626) 284-9901 (626) 284-1704 www.riedon.com 5/16 type 0402 4 0603 4 0805 4 1206 2010 2512 4020 power rating ( w ) 0.05 0.10 0.125 0.25 0.50 1.0 3 2.0 3 working 2 voltage ( vac ) trimmed 30 75 100 200 250 300 500 untrimmed ( 5% tol.) 60 150 200 400 900 1200 1200 resistance range ( ? ) tolerances available ( % ) temperature coef? cients available ( ppm/c ) 1 (others upon request) 1 ? - <10 ? 10% to 20% 250 5% to 20% 100 / 250 5% to 20% 100 / 250 5% to 20% 100 / 250 5% to 20% 100 / 250 5% to 20% 100 / 250 5% to 20% 100 / 250 10 ? - <100 ? 5% to 10% 100 2% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 100 ? - 1m 1% to 10% 50 / 100 1% to 10% 50 / 100 0.5% to 10% 50 / 100 0.5% to 10% 50 / 100 0.5% to 10% 50 / 100 0.5% to 10% 50 / 100 0.5% to 10% 50 / 100 >1m - 10m 5% to 20% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 chr series ? resistances from 1 ohm to 10m ohms ? power rating 0.05 to 2watt ? resistance tolerances to 0.5% ? tcrs to 50 ppm/c ? non-magnetic (contact ptag) ? suitable for gluing or soldering ? sizes: 0402 / 0603 / 0805 / 1206 / 2010 / 2512 / 4020 ? special high temperature version to 300c (h) (see ordering information below) specifications non-magnetic chip resistors speci? cation value temperature range -55c to +155c (standard) -55c to +125c (50ppm/c parts) -55c to +300c (high temperature version, tcr valid +25c to +125c ) climactic cetegory 55 / 155 / 56 solderability 250c / 3s (up to 6 months after shipment or 12 monts at storage in nitrogen) max. soldering temperature 260c / 10s 1) tcr: in ppm/c; +25c...+125c; tcr below standard tcr (highest value): +25c...+85c 2) continuous operating voltage (u_, ueff): v (p*r) or max. working voltage (the lower value) 3) solder pads must be suf? ciently large to keep resistorss peak temperature below rating 4) best tolerance for high temp version is 2%
riedon inc. 300 cypress avenue alhambra ca 91801 (626) 284-9901 (626) 284-1704 www.riedon.com 5/16 specifications (continued) long term stability max ? r <10 ? 10 ? - 10m storage 125c / 1000h 1% 0.5% storage 155c / 1000h 2% 1% load life / p=70% / 70c / 1000h 1% 0.5% short term overload 0.5% 0.25% humidity / 96%rh / 40c / 56 days 1% 0.5% rohs compliant exemption this part is rohs complian with exemption 7(c)-i, as authorized by 2011/b5/eu. packaging:bulk or blistertape to iec 60286-3 tape width 8mm / reel diameter 180 or 330mm minimum quantity bulk / 100 pieces per value minimum quantity tape & reel / 500 pieces per valu e ( note : except size 0402 / 1000 pieces per value) chr seriesnon-magnetic chip resistors type dimensions l b d c chr 0402 / chr 0402h 0.95 +0.10 / 0.05 0.48 +0.10 / -0.05 0.28 +0.1 / -0.05 0.1 +0.1 / -0.05 chr 0603 / chr 0603h 1.5 +0.15 / -0.05 0.8 +0.15 / -0.05 0.4 +0.15 / -0.05 0.2 +0.2 / -0.1 chr 0805 / chr 0805h 2.0 +0.15 / -0.05 1.25 +0.15 / -0.05 0.4 +0.15 / -0.05 0.3 +0.2 / -0.1 chr 1206 / chr 1206h 3.2 +0.15 / -0.05 1.5 +0.2 / -0.05 0.4 +0.15 / -0.05 0.3 +0.2 / -0.1 chr 2010 / chr 2010h 5.1 +0.15 / -0.05 2.5 +0.2 / -0.05 0.6 +0.20 / -0.1 1.2 0.2 chr 2512 / chr 2512h 6.3 +0.15 / -0.05 3.5 +0.2 / -0.05 0.6 +0.15 / -0.05 0.9 0.2 chr 4020 / chr 4020h 10.2 +0.15 / -0.05 5.1 +0.2 / -0.05 0.6 +0.15 / -0.05 0.9 0.2 ordering information standard part description: part type - resistance - tolerance - tcr example: chr 0603 10 kohms 5% 50ppm ( note: if no tcr is speci? ed, the highest value will be supplied ) high temperature part description ( h ): part type h - resistance - tolerance - tcr example: chr 0805h 50 kohms 10% 50ppm ( note: if no tcr is speci? ed, the highest value will be supplied ) 0 50 100 150 200 250 300 350 0 20 40 60 80 100 120 power ( % ) ambient temperature (c) power derating curve (h) version standard
|